Softing VCF enables the integration of bus communication for a variety of test tasks and a useful diagnosis, ideally on a Vehicle Communication Interface (VCI). This includes, among others, the simulation of electronic control units (ECUs) or the parallel recording of measured values from the bus or via XCP/CCP.
VCF enables (virtually) all functions required in vehicle and ECU communication. As far as off-board communication (diagnostics) is concerned, it is not only possible to display a test system but also simulate ECUs. In on-board communication, it is possible to implement residual bus simulation for one or more ECUs. The product also offers numerous functions for the analysis of bus communication. Measuring using bus communication enables the acquisition of the messages and signals available on the bus. Furthermore internal ECU measurement data can be acquired via the mechanisms defined in the XCP and CCP protocols. The block sequencer ensures cross-functional behavior control with the possibility of responding to results. The only requirement is that an appropriate script be developed in „C“ and loaded in to VCF.
Conventional configuration methods can be used depending on the communication function and bus system. This means A2L files in accordance with the ASAM standard ASAM MCD2-MC are usually used for measuring via XCP. Measuring and bus analysis use the LDF or FIBEX format on the LIN bus; AUTOSAR is also used for FlexRay or Ethernet. The well-known DBC format (CANdb) can also be used on the CAN.
VCF is currently supplied with support for the VCIs of the HS family, in particular the HSX in its various housing variants as well as the HSC with integrated OBD connector. Forthcoming VIN|ING VCIs with product numbers from 1000 will also be available with VCF support from the outset. Operating system support is provided as a standard for Windows, Android, Linux and iOS.