Automotive Electronics

Posts tagged with environment simulation

Efficient Fault Simulation – Automated, documented short-circuit and open load tests of ECU on-board diagnostics

Efficient Fault Simulation by Softing

In daily operation, ECUs in the vehicle are exposed to a wide range of environmental influences, such as vibrations, strongly fluctuating ambient temperatures and high humidity. The components must therefore be able to handle all conceivable faults. For the test, these faults are simulated on the ECU pin and the respective behavior and diagnostic entry documented. Typically, such fault simulations are used for function tests during development, for testing, release and validation of ECUs and components, as well as for integration validation during HiL testing or at the Functional Mock-Up (FMU).

Mastering Test Complexitiy with Individual Test Systems by Softing

Test Systems by Softing

It is a long journey from the start of engineering to the installation of all vehicle components and ECUs in the production vehicle. Comprehensive testing of the electronic components during the entire engineering process is essential. This is the only way to thoroughly safeguard and optimize hardware and software functions. Errors can be detected and remedied quickly – the earlier the better.