EDICusb - Multibus USB Interface for Vehicle Electronics

VCI with USB interface for use in engineering and testing

Diagnostic interfaces from Softing are based on the tried and tested EDIC® hardware and software platform. EDICusb is perfect for the use of heterogeneous on-board networks with CAN bus, K-line and LIN bus, and enables universal implementation in engineering and testing.

 

Areas of Application

  • Simulation
  • Test/validation
  • Manufacturing
  • Fast and reliable flash programming
  • Gateway tests (shared time base for CAN and ISO 9141/LIN)
 

Advantages

  • 3 independent channels: 2 x CAN and 1 x ISO 9141/LIN
  • Data preprocessing and protocol handling in the interface
  • Intelligent data buffering for parallel communication channels
  • Status display via 3 LEDs
  • Galvanic isolation


Protocol handling in the Interface

The vehicle protocols are handled directly in the interface. This ensures fast response times and reliable real-time behavior regardless of the PC operating system. Extensive buffer mechanisms make parallel operation of several communication channels possible.

Software Interfaces

The communication protocols UDS (ISO 14229) and KWP 2000 (ISO 14230, ISO 15765) as well as many OEM-specific protocols are supported via the standardized D-PDU API (ISO 22900-2). With a software layer based on the D-PDU API, the VCI can also be used as a PassThru device in accordance with SAE J2534. Together with the Diagnostic Tool Set DTS from Softing, a total solution in accordance with the MCD-3D standard ISO 22900-3 and ODX technology can be realized.

Scalability

By combining several EDICusb interfaces (or even other EDIC® interfaces), the number of communication channels available on the PC system can quickly be adapted to the relevant application.

Flexibility

Software upgrades are also available for EDICusb ensuring it is always perfectly equipped for future applications. This is also the way to realize customer-specific software solutions. The CAN bus physics can be varied by using piggybacks.

 

EDICblue

Automotive Diagnostic Interface - EDICblue

EDICusb

Automotive Diagnostic Interface - EDICusb

EDICpci

Automotive Diagnostic Interface - EDICpci

PC interface   

Bluetooth® V1.1 / V2.0 Cl. 2

  

WLAN IEEE 802.11 b/g

   

USB 2.0 fullspeed

 

   Mini USB connector

  

   Standard USB connector

  

   Sturdy ODU special connector

   

PCI Rev 2.2

  

Vehicle interface

   

Suitable for 12V systems

Suitable for 24V systems

 
Physical Layer   
   K/L-Line ISO 9141(-2)111
   K-Line Multiplexer – 12 ch.   
   CAN 2.0B high-speed122
   CAN low-speed 1 113
   LIN 4  1

Vehicle connection

   

   D-SUB connector

 

   Cable with connector in acc. with ISO 15031-3/ SAE J1962

  

   Connector integrated in housing in acc. with ISO 15031-3/SAE J1962

  

Galvanic isolation from PC interface

only with Bluetooth®

Software / supported operating systems

   

D-PDU API protocol software in acc. with ISO 22900-2

Windows 7

Windows 8.1

Windows 10

1 CAN low-speed transceiver switchable by software
2 With product variant EDICblue-LS
3 With optional bus physics
4 LIN alternatively to ISO 9141
5 Sturdy cable with ODU round connector

 

Order Numbers

EDICusbEDIC USB vehicle interface for ISO 9141-2 and 2 x CAN 2.0B including USB cable (1.8 m) and D-PDU API software on data carrier KAB06-ED25-J1962: connecting cable to CARB connector (SAE J1962 / ISO 15031-3), cable length approx. 0.8 m
EDICusb-PTDEDIC USB vehicle interface for ISO 9141-2 and 2 x CAN 2.0B including USB cable (1.8 m) and PassThru software interface on data carrier KAB06-ED25-J1962: connecting cable to CARB connector (SAE J1962 / ISO 15031-3), cable length approx. 0.8 m
 

Downloads

EDICusb (PDF) Data Sheet

«

We use cookies to ensure the best experience on our website. Your cookies can be disabled at any point. By proceeding without changing your settings, you agree with us. More details can be found in your privacy policy.