FAQs

To register the software use the software registration form.

See detail description at: FAQ_Install an eCOM PartP Interface with DTS V8.06.pdf

See detail description at: FAQ_Install an HSFamily Interface for DTS V8 USB.pdf

Using WLAN Ad-hoc mode see detail description at:

FAQ_Install an HSC Interface for DTS V8 WLAN Ad-hoc mode.pdf

Using WLAN Infrastructure mode see detail description at:

FAQ_Install an HSC Interface for DTS V8 WLAN Infrastructure mode.pdf

All supported interfaces are listed in the DTS 8 System Overview.

Please send an support request by using the support form.

1. Open the System Configurator.
2. Go to: System -> Add license…
3. Now you can browse for the new license.bin file.

1. After you have installed the DTS you can run the API Developer Kit Setup.
2. To execute the setup select the short cut from the program group Diagnostic Tool Set 8 -> Setup -> API Developer Kit Setup.

Note: The API Developer Kit requires the DTS8L-API-DK license.

1. DTS Monaco provides a quick start guide.
2. The functionality can be easily discovered with the Demonstration Mode.
3. Details can be found in the chapter DTS 8 Documentation -> Example Project Tutorial -> DTS Monaco Quickstart

1. DTS Venice provides a quick start guide.
2. The functionality can be easily discovered with the Demonstration Mode.
3. Details can be found in the chapter DTS 8 Documentation -> Example Project Tutorial -> DTS Venice Quickstart

All supported interfaces are listed in the DTS 7 System Overview.

Please send an support request by using the support form.

1. Open the DTS- System Configurator.
2. Go to: General Settings.
3. Press the “Add” Button, now you can browse for the new license.bin file.

Please send a support request by using the support form.

1. Open the TestCUBE2 Control Software.
2. Go to the tab “Options” and press the button „Add License“.
3. Now you can browse for the new license.bin file.