Automotive Electronics

Posts tagged with OBD

Free Webinar "OBDII goes UDS" | Recording online!

Webinar "OBDII goes UDS" – Future Legislation, Diagnostics and Testing

The on-demand webinar shows the latest CAN technology enhancements (CAN, CAN FD, CAN XL) support UDS, what the new SAE J1979 regulations mean in practice for diagnostic testing, and how OEMs and Tier 1s can benefit. It will also provide an introduction to coupling Kvaser's U100 interface with Softing's TDX diagnostic test development suite for on-road vehicle and mobile machinery maintenance. The latter includes protocol templates for UDS that, once developed, can be reused.

Free Webinar: "OBDII goes UDS" | presented by Kvaser and Softing

Free Webinar: "OBDII goes UDS" | presented by Kvaser and Softing

Join Softing Automotive and our partner Kvaser for a free joint webinar on December 7th, 2022 (10:00AM EDT, 04:00PM CET) to find out how the latest CAN technology enhancements (CAN, CAN FD, CAN XL) support UDS, what the new SAE J1979 regulations mean in practice for diagnostics test, and how OEMs and Tier 1s can benefit.

Efficient Fault Simulation – Automated, documented short-circuit and open load tests of ECU on-board diagnostics

Efficient Fault Simulation by Softing

In daily operation, ECUs in the vehicle are exposed to a wide range of environmental influences, such as vibrations, strongly fluctuating ambient temperatures and high humidity. The components must therefore be able to handle all conceivable faults. For the test, these faults are simulated on the ECU pin and the respective behavior and diagnostic entry documented. Typically, such fault simulations are used for function tests during development, for testing, release and validation of ECUs and components, as well as for integration validation during HiL testing or at the Functional Mock-Up (FMU).

«