Data NetworksAutomotive Electronics

Diagnostic Interface VIN|ING 1000

Compact USB interface for vehicle electronics

VIN|ING 1000 is a compact and universal VCI with USB interface. The combination of sturdiness, compact design and attractive price makes this VCI the perfect choice for use in the Manufacturing and After-Sales Service environment.

Areas of Application

  • Universal use in Manufacturing and After-Sales Service
  • Fast and reliable flash programming
  • Test and validation
  • Simulation


  • Reliable protocol handling in the interface
  • State-of-the-art, cost-effective standard VCI
  • Multiple vehicle interfaces with a compact design
  • Sturdy aluminium housing with protective caps
  • Flexible expansion thanks to USB host interface


Universal and Flexible

The interface works as a WLAN-Ethernetbridge and is a 1:1 implementation of the Ethernet interface of the vehicle for wireless LAN. Via the standardized D-PDU API (ISO 22900-2), the application communicates with the vehicle via UDS on IP (ISO14229) and DoIP (ISO 13400). This is the interface for the Diagnostic Tool Set DTS8 on a notebook or a diagnostic app on a smartphone. Customized versions can also be implemented on request.

The activation line required for DoIP has a flexible design and can be controlled via software. This means different implementations of gateway ECUs can be taken into consideration and Ethernet communication ensured in all relevant situations.

Easy to use

VIN|ING 600 is easy to use and can be connected with a smartphone like any other standard WLAN device. The device has an eye-catching, ergonomic, compact design that leaves plenty of leg room in the foot well on road tests. Thanks to the light band across the entire housing front, the status of WLAN and Ethernet communication is easy to see from lots of different perspectives. This WLAN bridge is a genuine alternative to a cable with an RJ54 connector - not only for mobile use. This means that familiar problems that often occur because of wear and tear at the connector or cable break, can thus be avoided.

Reliable and Safe

The ECE type approval and the associated EMC tests guarantee the interference-free and safe operation of the device in the vehicle. By using a glass-fiber reinforced and impact-resistant plastic as well as a high-grade OBD connector, the device can also withstand severe strain. Thanks to the WPA2 encryption with PSK, the vehicle data is safe from any attempted eavesdropping over the transmission path.

Technical Information

Technical Data 
FormatApprox. 75 x 90 x 30 mm
Power supplyAlternatively over USB or vehicle interface
Vehicle voltage range7 to 32 V
Microcontroller32-bit microcontroller
PC interfaceUSB V2.0 Full Speed, 12 Mbit/s, pluggable USB cable (jack type B)
Vehicle interface15-pin DSUB connector, all signals galvanically isolated from the PC interface
CANTwo separate CAN high-speed channels compliant with ISO 11898-2
CAN channel 2 can be switched by software to CAN fault-tolerant ISO 11898-3
ISO 9141-2Two K-lines for 12V and 24V vehicle systems, one  K-line can be used as L-line
Baud rate max. 250 kBaud (depending on the protocol and bus physics)
Temperature rangeOperation:  -40 ... +70 °C, Storage: -40 ... +85 °C
EMC conformityEmission: EN 55022, EN 55011 Class A, EN 61000-6-3
Immunity: EN 61000-6-2
Safety: EN 60950
Software interfaceD-PDU API by samtec
System requirementOperating system Windows 7, Windows 8

Order Information

Order Numbers 
VINING-1000Diagnostic interface for 2 x CAN and 2 x K-line with USB interface, including USB cable as well as D-PDU API and PassThru software
VINING-1010 (on request)Diagnostic interface for 1 x CAN high-speed with USB interface, including USB cable as well as D-PDU API and PassThru software
VINING-1020 (on request)Diagnostic interface for 1 x CAN high-speed with USB interface, with sturdy and lockable USB cable, including USB cable as well as D-PDU API and PassThru software
Supplementary Products and Services
KAB16-DSUB15-J1962Connecting cable to OBD connector (SAE J1962 / ISO 15031-3), cable length approx. 2 m
KAB16-DSUB15-J1939 (on request)Connecting cable to J1939 connector, cable length approx. 2 m


Data SheetVIN|ING 1000 – Compact USB Interface for Vehicle Electronics
Flyer VIN|ING VCIsVIN|ING Family – One Solution. Many Form Factors. The VIN|ING VCIs for innovative Communication Concepts.