Automotive Electronics



Areas of Application

  • Development of diagnostic and control functions for ECUs
  • Function test and validation
  • Integration and system test
  • Preparation of test sequences for Manufacturing and Service
  • Analysis of returns and Quality Assurance


  • 低成本和更短时间的的熟悉几种工具的功能
  • 由于直观的操作和预配置模板快速获得结果
  • 高品质的通讯问题,早期发现和补救问题
  • 高效灵活地适应各种任务和通信数据和充分保证测试结果
  • 通讯数据和测试记过可以全部记录成文档



  • 开发电子控制单元(ECU)的诊断和控制功能
  • 功能测试和验证
  • 集成测试和系统测试 
  • 制造和售后服务的测试序列的制备
  • 分析结果以及和质量保证





图形化的用户界面可以凭直觉来使用,并且可以调整以适应各种任务。工作区一分为二:一个是固定的布局,另一个是可以通过使用标签进行切换的布局。在界面底部的状态显示区将显示通讯服务器传递来的讯息。使用特殊的可配置的界面元素来实现各种功能。这种“HMI Controls”可以在配置模式下自由的设计布局。工作区可以被保存。针对典型的应用场景提供预定义模板。在运行模式下,一个配置好的工作区可以被“开始”,或者说被调用。


测试序列可以被自动化使得测试结果特别容易复现并且支持非常复杂的功能测试。经过验证,DTS Monaco也可以对电子控制单元(ECU)没有规定的部分进行参数化。这意味着在所有相关的通信等级中除了正常情况测试之外,可以对错误情况进行测试。通过参数化的配置可以完成各种通讯水平上的测试。通讯数据和测试结果可以被记录下来。


  • Testing communication
  • Analyzing data on bus
  • Examining ODX data vs. ECU
  • Reading/deleting error memory
  • Programming flash memory
  • Displaying measuring values
  • Parameterizing ECUs
  • Coding variants
  • Executing ECU routines
  • Testing OBD functions
  • Creating/executing test sequences
  • Identifying built-in ECUs


  • Communication server: ISO MVCI-Server/ASAM MCD runtime system (COS)
  • ODX data interface: ISO 22901-1/ASAM MCD-2D
  • Programming interface: ISO 22900-3/ASAM MCD-3D
  • VCI access interface: ISO 22900-2 (D-PDU API) via CAN/-FD, K-line, Ethernet
  • ISO 13400 (DoIP)
  • ISO13209 (OTX)
  • ISO 14229 (UDS)
  • ISO 14230 (KWP2000)
  • ISO 15031 (OBD)
  • ISO 15765
  • ISO 27145 (WWH-OBD)
  • SAE J2534
  • SAE J1939
  • and many more

HMI Control Libraries

 HMI Control Libraries - Communication
Bus TraceBasic analysis of both diagnostic and on-board communication on the bus level with hex. representation
Diagnostic ServicesExpert data verification and communication tests with full access to all Diagnostic Services
Symbolic TraceAnalysis of diagnostic communication on the application level with symbolic representation
Service TableSingle or cyclic execution of a Diagnostic Services List Control
OTX (replaces OTX Script Console)Processing complex diagnostic sequences in accordance with ISO 13209 (OTX)
 HMI Control Libraries - Control
AnnotationVisualizing tests with pictures, text or linked RTF/PDF/CHM files
Communication ControlAutomatized connection establishment and clearing of ECU communication
Logical Link ListMonitoring and influencing the communication status of ECUs
Toggle SequencesStarting of any desired service sequences incl. optional pre-/post-actions, e.g. changing the ECU state
 HMI Control Libraries - Function
DTC (Diagnostic Trouble Codes)One-off or cyclical reading and deleting of an ECU fault memory
ECU IdentificationReading of the identification information of single ECU or the whole vehicle
FlashECU programming - see next page
OBDValidating and releasing the self-diagnosis - see next page
Soft KeyExecute sequences of services, jobs or sequences via buttons
Tool Quick TestFast determination of the vehicle status regarding ECU identification and fault memory
Variant CodingPowerful expert tool for coding of a single ECU

HMI Control Libraries - Measurement
Service TableReadout of measured values and adaptation of parameters values within a service or parameter list
RecorderRecord/store (list, gauges and scope views) and adapt (actuator view) ECU variables and parameters
Graphical InstrumentVisualize and adapt ECU variables and parameters using various graphic elements

Technical Information

Technical Data 
MVCI server and OTX runtime systemSee data sheet: Diagnostic Tool Set 8 – System Overview
Standard compliance (selection)ISO 22901-1/ASAM MCD-2D (ODX) V2.2.0 and 2.0.1 (Open Diagnostic Data Exchange),
ISO 22900-2 (D-PDU API) via CAN/-FD, K-line and Ethernet (ISO 13400 DoIP/Tester – Gateway: DoIP_Vehicle/single MVCI)
ISO 22900-3/ASAM MCD-3D version 3.0.0 – application interface,
ISO 13209 (OTX) version 1.0 (Open Test Sequence Exchange),
ISO 14229 (UDS), ISO 15765, ISO 14230;
ISO 15031, SAE J1979 and SAE J2012 (all OBD),
ISO 27145 (WWH-OBD), SAE J1939
Special PC requirementsScreen resolution ≥ 1024x768 (XGA) – depend. on the number of HMI Controls to be displayed in parallel
Templates within delivery scopeCommunication and Analysis, Error Memory, Measuring and Parameterizing, Onboard Diagnostics, Programming, Test Sequences
Example workspacesExtensive Monaco example workspace as introduction into the main features based on the sample database within delivery scope

Order Information

Order Numbers 
DTS8L+MONACOEngineering tester DTS 8 Monaco for testing of diagnostic communication, data and sequences. Comprises the basic scope of functionality with regard to both, editing and high level diagnostic functions. High application security as workspaces/layouts/controls CANNOT be modified/configured/saved. The diagnostic functionality is limited to the controls of the library Communication.
DTS8L+MON-MINDOption: Creating and configuring of workspaces in DTS 8 Monaco. Combines the unrestricted configuration of layouts and controls as well as the possibility to save workspaces (DTS8L-MON-CONF) with the Interface Designer (DTS8L-MIND), which enables to create/delete/rename workspace layouts as well as to create workspace templates.
DTS8L-HMI-LIBSOption: All other diagnostic functions (i.e. HMI Controls) of DTS 8 Mona co, which are not included in the basic scope of functionality.
DTS8L-MON-MSPMaintenance and Support Package incl. support by telephone and e-mail with regard to installation, setup and operation; minor and medium software upgrades free of charge as well as major software upgrades at a reduced rate
Supplementary Products and Services
S-DONGLEMicro USB license dongle, as an alternative to licensing on a hardware interface
Other cross-product optionsSee data sheet: Diagnostic Tool Set 8 – System Overview


Trial VersionFor your free trial version of Diagnostic Tool Set 8 and OTX Studio please contact us at