SMT - Softing 测量技术

SMT结合了信号生成,通信,计算能力和存储深度等先进的测量技术。提供了一整套模块化系统的物理IO和通信接口。

概要

系统设计

独特的模块的概念,每个单独应用的最优化。通道可以扩展到几乎任何程度IO从几个到几百个。智能网络的管理,分散系统或大的空间距离也没有问题。

SMT的模块化测量和通信通道没有限制。基础的系统特性,如能源供应,冷却和计算能力可以进行相应的调整,以适应特殊情况。同时,Softing 测量技术是为了以最好的状态的整合。模块化设计可以根据功能所需配置最小尺寸。

应用领域

SMT系统是坚固耐用的,他们是完美的用在苛刻的测试车辆使用环境。他们往往都作为测试平台和制造用于固定应用研究。SMT任务是决不限于简单地获取测量值。组合测量,测试和自动化系统,Softing 测量技术还可以实现对负责有关地区的控制和监管,过程监控和自动化,实时仿真和数据记录功能。

优势

从发展伊始,SMT不得不满足用户要求苛刻的测量技术。在实践中它们往往只存在细小的区别。通过设计安装的标准的连接器,综合安全和自诊断功能。同时SMT注重用户友好性和功能的透明,培训和熟练使用所需的时间是最小的。标准附件范围保证了通用性。

由于其模块化的测量技术,具有很大的灵活,开放的专有技术以及独立程度高且透明接口,保证未来的投资。

模块预览

SMT模块分为三类

  • 系统模块覆盖地区的能源供应,冷却和网络以及数据处理。
  • 可沟通的接口部件
  • 物理IO是用于获取物理值,并支持大量常见的传感器。

系统模块

V12-120.4/V12-240.1 – Supply Modules (120W & 240W)

V12-120.4/V12-240.1 – Supply Modules (120W & 240W)

Based on a nominal 12 V input voltage, the modules provide a power for SMT systems with a maximum power consumption of 120 W (V12-120.4) or 240 W (V12-240.1).

VAC-240.1 - Supply Module (Mains Operation)

VAC-240.1 - Supply Module (Mains Operation)

The module supplies SMT systems with a maximum power consumption of 240 W on the basis of mains operation between 110 V and 230 V. An additional feature is the integrated fan which ensures needs-oriented cooling of all components.

B12-033.1 - Buffer Modul (12V/33Wh)

B12-033.1 - Buffer Modul (12V/33Wh)

The module is used to be able to continue measuring during any interruption to the on-board supply system. Furthermore, it enables measurement tests if the on-board supply system is not to be further burdened by the measurement technology.

XLL.2 / XLR.2 – Fan Modules (Left & Right)

XLL.2/XLR.2 – Fan Modules (Left & Right)

The fan modules are on the side of every SMT system. They actively cool the individual components and thus enable reliable operation over a wide environmental temperature range.

RGC-PC.2 - Controller Module for PEA Software

RGC-PC.2 - Controller Module for PEA Software

The Realtime Gateway Controller consists of a full-function PC as well as its connection to the internal SMT system bus. Together with the system software PEA, the RGC-PC.2 is responsible for configuring and controlling all integrated SMT modules.

LBITSTER.3 - Link Module for SMT Components

LBITSTER.3 - Link Module for SMT Components

The LBITSTER.3 connects two SMT module blocks resulting in a single measurement system. This enables the spatial distribution of measurement amplifiers and communication modules without negatively impacting important system characteristics, such as the synchronicity of the measurement channels or the maximum sum sampling rate.

ICANSYS.3 - Interface for Field Bus Components

ICANSYS.3 - Interface for Field Bus Components

The ICANSYS.3 is a one-channel interface module for linking CAN-based measurement technology into SMT systems. In addition to the integrated CAN node, it powers the external components.

通讯模块

ICAN.2 - Communication Module for CAN

ICAN.2 - Communication Module for CAN

The ICAN.2 is a 2-channel interface module for acquiring and stimulating CAN signals. It is used both for recording bus communication and for residual bus simulations.

IFLEXRAY.1 – Communication Module for FlexRay

IFLEXRAY.1 – Communication Module for FlexRay

The IFLEXRAY.1 is an interface module for recording FlexRay cluster bus communication. Both complete bus traces and the targeted acquisition of selected signals are supported.

IGPS.1 - Communication Module for GPS

IGPS.1 - Communication Module for GPS

The IGPS.1 is used to acquire typical GPS information such as the geographical position, current speed, acceleration and direction of movement. The receiver data is read in and processed simultaneously with other SMT signals.

ILIN.1 - Communication Module for LIN

ILIN.1 - Communication Module for LIN

The ILIN.1 is a 4-channel interface module for acquiring and stimulating LIN signals. Each individual node can be used as LIN master, LIN slave and for bus monitoring.

物理 IOs

AS08.1 - Output Module for Analog Voltages

AS08.1 - Output Module for Analog Voltages

The AS08.1 adds electric outputs to the measurement data acquisition system. Analog voltages and currents as well as frequency and PWM signals can be output.

MA08.2/MS08.2 – Amplifier for Analog Voltages

MA08.2/MS08.2 – Amplifier for Analog Voltages

The MS08.2 is used to acquire up to eight electrical voltages, currents or IEPE sensors. The MA08.2 provides an additional flexible voltage supply per measurement channel and thus supports a large number of standard transducers.

MB08.1 – Amplifier for Bridges

MB08.1 – Amplifier for Bridges

Using the bridge amplifier MB08.1, up to eight ohmic and piezoresistive full and half bridges can be acquired. Every channel can be adapted individually and flexibly to the specific measuring bridge.

MD04.1 – Amplifier for Frequency Signals

MD04.1 – Amplifier for Frequency Signals

To be able to cover as many applications as possible, each channel has flexibly configurable signal conditioning with up to three tracks. This supports the acquisition of frequency and PWM signals as well as counter applications.

MD32.1 - I/O Module for Digital Signals

MD32.1 - I/O Module for Digital Signals

The MD32.1 has 32 digital channels which can be configured either as inputs or outputs. Furthermore, a range of different supply voltages is available which can be used, for example, to supply connected transducers.

MT20.2 – Amplifier for Thermocouples

MT20.2 – Amplifier for Thermocouples

The acquisition module MT20.2 is used to measure temperature with thermocouples (type K or other). Due to its high channel density and the galvanic isolation of the individual channels, it is particularly suitable for multi-channel applications.

下载

 Overview
SMT - Product FamilySofting Measurement Technology – the Universal Measurement and Automation System for Mobile and Stationary Applications
 System Modules
V12-120.4/V12-240.1Supply Modules for SMT Systems for Operation with an On-Board Electrical System or Battery Supply
VAC-240.1Supply Module for SMT Systems for Mains Operation in Stationary Applications
B12-033.1Buffer Module for SMT Systems for Bridging Voltage Interruptions
RGC-PC.2Computing Module for SMT Systems for Data Acquisition and Processing using the Measuring Software PEA
XLL.2/XLR.2Fan Modules for SMT Systems for Appropriate Cooling of All Components
ICANSYS.3Interface Module for SMT Systems for Integrating Field Bus Measurement Components
LBITSTER.3Link Module for SMT Systems for Connecting Decentral Components
 Communication Modules
ICAN.2Communication Module for SMT Systems for Integrating Signal-Based CAN Networks
IFLEXRAY.1Communication Module for SMT Systems for Connecting to FlexRay Clusters
ILIN.1Communication Module for SMT Systems for Integrating Signal-Based LIN Networks
IGPS.1Communication Module for SMT Systems for Acquiring GPS Signals in Mobile Applications
 Physical IOs
AS08.1Output Module for SMT Systems for Generating Electrical Analog and Digital Signals
MA08.1/MS08.1Measurement Amplifiers for SMT Systems for Measuring Voltages and Acquiring Voltage-Fed Transducers
MA08.2/MS08.2Measurement Amplifiers for SMT Systems for Acquiring Voltages, Currents, IEPE Sensors and Voltage-Fed Transducers
MB08.1Measurement Amplifier for SMT Systems for Supplying and Acquiring Ratiometric Transducers
MD04.1Measurement Amplifier for SMT Systems for Temporal
Interpretation of Pulse-Shaped Signals
MD32.1Input and Output Module for SMT Systems for Acquiring and Generating Digital Signals
MT20K.1Measurement Amplifiers for SMT Systems for Measuring Temperatures with Thermocouples of the Type K
MT20.2Measurement Amplifier for SMT Systems for Measuring Temperatures with Thermocouples
«

We use cookies to ensure the best experience on our website. Your cookies can be disabled at any point. By proceeding without changing your settings, you agree with us. More details can be found in your privacy policy.